Compact coffee equipment for home and travel
We have received your review.
About X-Press58
Use the button to choose 84, 88, 92 or 96 °C. You can also turn pre-infusion on or off. When enabled, the machine wets the coffee for 10 seconds before brewing continues. Both settings are saved for your next brew.
84 / 88 / 92 / 96 °C · 10-second pre-infusion, on or off
With a charged battery, X-Press58 heats the water in the reservoir itself. You do not need to bring hot water. If you already have it available, you can skip heating and brew straight away. This uses less battery power.
The included stand holds the machine above your cup, so you do not have to hold it during brewing. The tamper and dosing ring are also included for preparing your coffee. After use, store the machine and accessories in the carry bag.
Stand · tamper · dosing ring · carry bag included
Is this right for me?
X-Press58 suits anyone who wants to work with ground coffee and control how the espresso flows. The machine heats and pumps; you take care of preparing the coffee.
Your grinder needs to grind finely enough and allow small adjustments. Start with 18 grams of coffee in the included basket. The right grind depends on your beans and the flow. Distribution and tamping also matter.
You weigh the dose, fill the filter basket and tamp the coffee. The tamper and dosing ring you need are included. If you mainly want to insert a capsule and press start, a capsule machine is better suited to your use.
Place the machine in its stand on a flat, sturdy table and put the cup underneath. Allow space for your grinder, coffee and water. The machine weighs around 825 grams; your complete coffee kit will weigh more.
How it works
Remove the cup and the locking ring with its filter basket. Place the dosing ring on the basket and add 18 grams of finely ground coffee. Distribute the coffee evenly and tamp straight down with the tamper. Remove the dosing ring before attaching the basket.
Screw the locking ring with the filled filter basket firmly onto the bottom of the machine. Place the machine in the stand on a flat surface and put the cup under the outlet.
Open the lid and fill the reservoir with drinking water, no higher than the 80 ml mark. Close the lid. You can use room-temperature water and let the machine heat it.
Press and hold the button for 2 seconds until you hear the beep. The machine heats the water to the selected temperature. If enabled, this is followed by 10 seconds of pre-infusion, and brewing starts automatically. Press the button once during brewing to stop when you have your desired amount of espresso.
Specifications
What you receive
Frequently asked questions
X-Press58 is designed for ground coffee and does not come with a capsule adapter. You can use pre-ground coffee if the grind suits the machine. If the coffee flows too quickly or barely flows at all, you cannot adjust that grind. With a suitable espresso grinder, you can do so for your next dose.
No. The coffee retains some of the water. The reservoir capacity is therefore not the same as the amount in your cup. Stop brewing at your desired amount and, if needed, use a suitable scale to monitor it.
That depends on the part. X-Press58 uses a separate filter basket with a locking ring. A complete handled portafilter from another machine will not automatically attach to it. The precise dimensions of separate baskets and tampers also need to fit. Send us the brand and model if you would like this checked beforehand.
For fast charging, use a USB-C adapter rated at 30 W or more with QC 2.0 / PD 3.1 support. With a suitable 30 W adapter, a full charge takes around 2 hours. The machine draws a maximum of 30 W. A suitable 10 W charger charges more slowly; allow around 6 hours. The charging cable is included, but the adapter is not.
No. The machine makes espresso and does not have a steam wand. For cappuccino or other milk coffees, heat and froth the milk separately. Only fill the water reservoir with water.
After brewing, let the machine cool for a few minutes before releasing the locking ring. Remove the basket and discard the used coffee. You can use the air blower to push it out of the upturned basket. Rinse the basket clean and run clean, hot water through the machine without coffee in direct brewing mode. Empty the reservoir afterwards. Wipe the housing with a damp cloth and keep the button and charging port dry. Do not immerse the machine or use cleaning products inside it.